ABCDEFGHIJKLMNOPQRSTUVWXYZ
1
2
3
4
S NoJob ProfileJob DescriptionExperience
5
1Design Engineer (Instrument)• Engineering bachelor’s degree in Instrument for entry level.
• Excellent knowledge in international Standards and CAD Software such as (Smart Plant, Instrument engineering tools , CAD, MicroStation, Smart Plant 3D)
• Analyzing site condition for proposed design.
• Able to sketch site condition, modification and taking accurate measurements with proper measurement tools. Able to make engineering load and sizing calculation and material selection is a plus.
• Shall be familiar with industrial equipment.
• Knowledge of Local Engineering Standards.
• Knowledge of International Codes & Standards.		2-5 Years
6
2Civil Designero Engineering bachelor’s degree in civil/Structural for entry level.
o Desired Experience & Skills
o Excellent knowledge in international Standards and CAD Software such as (SP engineering tools , CAD, MicroStation …etc.)
o Shall be familiar with industrial equipment.
o Knowledge of Local Engineering Standards.
o Knowledge of International Codes & Standards.		2-5 Years
7
3Project Engineer Strategic Contribution:
• Establish project WBS, prepare schedule, plan project resources, allocate budget, verify, and process invoices, create SES, enter & approve time sheet.
• Monitor and control man-hours for activities and perform project close out IN ORDER TO maintain projects data and ensure accessibility of information to all stakeholders and project team members.
• Develop and finalize Project strategy.
• Develop, compile, and obtain approval endorsement on bid slate , recommended bidders list with PAC.
• Arrange pre-qualification process in co-ordination with PAC for those not in ACL/AVL.
• Prepare and obtain Sole /Single source justification and obtain Affiliate President approvals.
• Raise PR, ensure approval per authority, manage bids technical clarifications & evaluation, follow-up for PO placement.
• Support in preparation and finalizing of ITB, TBA.
• Prepare / Issue Construction TBAs
• Arrange all KOM's and issue MOM for respective phases.
• Process project financial close out in SAP.
• Manage change to preserve business plan commitments. Initiate Phase Review if objectives must change.
10 Years Above
8
4Process Control Engineer• Experience in Design & Engineering environment (EPC, Engineering Offices etc.) in the field of Petrochemical, Refinery, Oil, Gas Industry.
• Knowledge of SABIC Engineering Specifications & applicable Industry Standards and Codes (e.g., ISA, API).
• Knowledge with engineering drawings, schematic diagrams, engineering standards specs and codes.		10 Years
9
5Project Lead Engineer • Establish project WBS, prepare schedule, plan project resources, allocate budget, verify, and process invoices, create SES, enter & approve time sheet.
• Monitor and control man-hours for activities and perform project close out IN ORDER TO maintain projects data and ensure accessibility of information to all stakeholders and project team members.
• Involve functional expertise in design reviews and key decisions as well as risk strategies.
• Develop and finalize Project strategy.
• Develop , compile, and obtain approval endorsement on bid slate , recommended bidders list with PAC.
• Arrange pre-qualification process in co-ordination with PAC for those not in ACL/AVL.
• Prepare and obtain Sole /Single source justification and obtain Affiliate President approvals.
• Raise PR, ensure approval per authority, manage bids technical clarifications & evaluation, follow-up for PO placement.
• Support in preparation and finalizing of ITB, TBA.
• Prepare / Issue Construction TBAs
• Arrange all KOM's and issue MOM for respective phases.
• Checks, verifies, and approves documentations to reflect the “as built” condition as required, updates the drawings/documents along with CAD Operators.
• Obtain Lessons learned from the project team.
• Process project financial close out in SAP.
• Compliance to Environment & Health Safety Standard rules and applicable SHEMS.
• Strategic Planning & Alliances:
• Plan and review work processes, CDP, FEEP, DEP submitted by affiliate, obtain G3A to ensure that project-design packages are in line with the affiliate's requirements.
• Analyze the actual performance against the plan and adjust consistent with plan objectives.
• Preparation and approvals of CR/CO thru Change Management processes and procedures.
• Manage change to preserve business plan commitments. Initiate Phase Review if objectives must change.
• Department Management:
• Ensures the correct implementation of the plant modifications as per the design packages.
• Verifies and approves new projects and modifications prior to hand over to the customer to ensure compliance with the approved design package.
• Apply project resources according to the approved project plan.
• Track and report on progress to plan.
• Stakeholder / Network Management:
• Keep all stakeholders informed of progress and issues.
• Interface with authorities for site specific permits.
• Visit the construction sites regularly in support of ongoing projects.
• Keep regular meetings with the contractor to review, safety, progress and all project related items and produce Action MOM.
• Coordinates design review and safety review meetings to ensure compliance with work scope.
• Assist in material selection and upgrade to maintain the equipment operation safely and effectively.
• Approve all Material submittals by Contractor during Procurement and Construction phases.
• Establish and publish clear priorities among project activities.
• Using the rule of thumb and analytical thinking to evaluate the project performance		10 Years
10
6Principal Project EngineerStrategic Contribution:
• Establish project WBS, prepare schedule, plan project resources, allocate budget, verify and process invoices, create SES, enter & approve time sheet. • Monitor and control man-hours for activities, and perform project close out IN ORDER TO maintain projects data and ensure accessibility of information to all stakeholders and project team members. • Involve functional expertise in design reviews and key decisions as well as risk strategies. • Develop and finalise Project strategy. • Develop , compile and obtain approval endorsement on bid slate , recommended bidders list with PAC. • Arrange pre-qualification process in co-ordination with PAC for those not in ACL/AVL. • Prepare and obtain Sole /Single source justification and obtain Affiliate President approvals. • Raise PR, ensure approval per authority, manage bids technical clarifications & evaluation, follow-up for PO placement. • Support in preparation and finailsing of ITB, TBA. • Prepare / Issue Construction TBAs • Arrange all KOM's and issue MOM for respecctive phases. • Checks, verifies, and approves documentations to reflect the “as built” condition as required, updates the drawings/documents along with CAD Operators. • Obtain Lessons learned from the project team. • Process project financial close out in SAP. • Compliance to EHSS rules and applicable SHEMS • Monitor site activities to ensure desired safety performance • support to Sr. Manager / Director on tasks assigned other than project
Strategic Planning & Alliances:
• Plan and review work processes, CDP, FEEP, DEP submitted by affiliate, obtain G3A in order to ensure that project-design packages are in line with the affiliate's requirements. • Analyze the actual performance against the plan and make adjustments consistent with plan objectives. • Preparation and approvals of CR/CO thru Change Management processes and procedures. • Manage change to preserve business plan commitments. Initiate Phase Review if objectives must change.
Department Management:
• Ensures the correct implementation of the plant modifications as per the design packages. • Verifies and approves new projects and modifications prior to hand over to the customer to ensure compliance with the approved design package. • Apply project resources according to the approved project plan. • Track and report on progress to plan.
Stakeholder / Network Management: • Keep all stakeholders informed of progress and issues. • Interface with authorities for site specific permits. • Visit the construction sites regularly in support of ongoing projects. • Keep regular meeting with the contractor to review, safety, progress and all project related items and produce Action MOM.
Continuous Improvement:
• Coordinates design review and safety review meetings to ensure compliance with work scope. • Assist in material selection and upgrade in order to maintain the equipment operation safely and effectively. • Approve all Material submittals by Contractor during Procurement and Construction phases. • Establish and publish clear priorities among project activities. • Using the rule of thumb and analytical thinking to evaluate the project performance.
People Management:
• Facilitate communication with the rest of the organization. • Demonstrate desired leadership to ensue timliness of project delivery and conflict management . Interface with external stake holders and third party agencies . Ensure engineering / design packages for plant modifications in his discipline area confers with the sponsors and other concern departments, work with Draftsmen & designers during the preparation of packages. • Attend FAT with project team as required. • Provides clarification to construction management and provides guidance and technical supports during the construction phase. • Assure that all team members understand their roles and accept their responsibilities. • Provide input on the performance of project team members to their supervisors.		12-15 Yrs
11
7
Instrument & Control System Engineer
 Provide technical support, attend complex breakdowns and provide solution.
Conduct all failure/breakdown analysis of all critical and semi-critical systems, issuing the technical reports and corrective recommendation.
Assure proper design and installation of instrument & control systems according to regulatory and company standards.
Support APM team to develop maintenance strategy by following the RCM methodology
Support APM team in validating the SIL level by following the RIS methodology
Lead and participate as member in root cause analysis (RCA)
Devolve training packages/ programs for SeED engineers and maintenance team
Assign as focal point to lead the implementation for I&CS of SABIC manufacturing strategy.
Advocates the implementation of reliability best practices and evaluates new technology and new ideas to continuously improve the reliability of the plant’s instrumentation and control systems.
Participate in PHA and Hazop revalidation activities.
Use Meridium tools to Analyze equipment history to identify and evaluate Bad Actors and Performance Killers and provide Resolution.
Provide Technical input and support to SMD / MTCE if needed.
Comply with all of OMS requirements including safety and cybersecurity requirements
Participate in MOC/Capex activities to perform the technical Evaluation.

Requirements:

Minimum BSc/BE Degree in Electrical / Instrument/Control Engineering.

• Communication skills

• Team work

• Leadership skills

• Analytical thinking skills

• Critical thinking skills

Experience:

Experience in control systems and Instrumentation in maintenance and project role for petrochemical industries, Oil & Gas or similar.
Familiar with SABIC standards and the international standards.
Familiar with SABIC Best practices and maturity modules.
Good field instrumentation and control system experience.
Good experience in Microsoft office software’s (word, excel and PowerPoint)
Good knowledge in Meridium and SAP systems.
Basic understanding for SIL level, calculation and validation.
Good experience in DCS and PLCs.
Advanced experience in ESD system.		7 Yrs ↑
12
8Document Controller Maintaining documentation room under control and organized very well.
Ensure documentation (softcopy /hardcopy) is up-to-date and uploaded into EDMS as per received project As-built and MOC packages.
Ensure documents are stored in secured location and used by authorized employees only. Development of hardcopy filling system and maintaining master index updated.
Document/drawing indexing and tag relationship mapping to ensure fast retrieval of plant and asset related data/document.
Retrieve soft / hard copies and any needed information of engineering drawing / documents as requested by projects.
Receives, check and verify data submissions from mega projects, site projects and other sources to ensure compliance to SABIC standards and affiliates specific documentation requirements.
Collaborate with external and internal stakeholders to understand business needs and requirements.
Documentation of functional design specs, binder register record, and TAG/document/Drawing numbering register.
Collaborate with the CAD/Design team, and EDMS administrator to ensure system operation and data integrity.
Carry out services such as printing and scanning of engineering drawings and documents.
Assigning and control Tag/document/drawing numbering system.
MINIMUM EDUCATION/EXPERIENCE REQUIREMENTS

Bachelor’s Degree in business or related field is preferred with (4 years of experience in the engineering documentation)
Diploma / Associate Degree with (8 years of experience in the engineering documentation)
Desired Experience & Skills

Familiar with all types and categories of engineering documents/drawings including international codes and standards.
Ability to read Engineering Drawings.
Preferred Experience working with EDMS solution e.g. SmartPlant Foundation, or Projectwise
Familiar in maintaining a technical library and Document Room.
Good knowledge of filing and indexing of files/books.
Excellent verbal and written communication skills.
Very Good skill in Microsoft Excel, data analysis.
13
9Sr. Administrator Managing office activities to ensure effective communication with all the stakeholders in line with business plan.
Maintains documentation control under safe custody without any damage or deterioration with easy traceability, ensures that controlled copies of latest approved documents and drawings are given to the staff, contractors and suppliers as applicable to comply with document control and company’s secrecy policy.
Maintains record of Incoming /outgoing documents by ensuring that the information is accurate and up to date to comply with document quality control procedures.
Provide support to the visiting Vendors. Maintain stock of stationery items and office gadgets to comply with business requirements.
Coordination with different departments within organization and Organize and schedule meetings and appointments and prepare minutes of meeting (MOM) to comply with business plan
Coordinate all activities related to the control of project documents, drawings and audit reports etc. to comply with document and quality control procedures. 		5 Yrs
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100