Complete Steps for Factory Reset a Night Owl DVR or NVR

A DVR transforms analog footage into a digital format, while an NVR basically only works with digital footage. DVR systems process data at the recorder, while NVR systems decode and process data at the camera before transmitting it to the recorder for storage and remote viewing. Unless they’ve been rearranged, the DVR connects to an analog CCTV system through a coaxial cable, while the NVR connects to an IP camera system through an Ethernet or WiFi connection.

Are you worried about how to factory reset a night owl DVR or NVR? Well, then you must read this article, below, we have provided you with some quick solutions on how to factory reset a night owl DVR or NVR.

Following Night Owl THD Series DVR Models are Eligible for a Factory Reset

DVR-THD30B-81, DVR-THD50B-81, and DVR-THD80B-82.

Step 1: Right-click anywhere on the screen to bring up a drop-down menu.

Step 2: Select Main Menu (you may need to log in after this).

Step 3: Select the Maintenance tab.

Step 4: Choose the Default Sub-tab. Click Factory Defaults on this screen to reset all parameters to their default values.

Step 5: Following this step, your system will reboot.

The Night Owl WNVR Series has been Factory Reset.

These Night Owl models are affected: WNVR-20B-4, WNVR-20B-8.

Right-click everywhere on the screen to bring up the quick open bar at the bottom.

Step 1: Select the main navigation bar (you may be required to log in shortly after this step).

Step 2: Navigate to the Maintenance tab.

Step 3: On the left menu, click the Factory Default Sub-tab.

Step 4: On this screen, select All to factory reset all of your NVR settings and then click Apply.

Step 5: After this step, your system will restart.