> About this documentAbout this document

• This manual is created in the following environment
  • Windows：Windows10 Home Premium
  • Mac：macOS Catalina
  • Wi-Fi Router：TP-LINK Archer A10 Pro

> Things necessaryThings necessary

• Router　(TP-LINK Archer A10 Pro)
• Wired LAN for Internet connection
• LAN　Cable
  • Use the one that comes with the router.
• Router configuration file ( HADO-ArcherA10Pro-config.bin)
  • Copy it to your desktop.
• PC for router setting
  • There is no need to prepare a PC other than the PC Server (Windows).

※A separate wired LAN adapter may be used if the router setting PC does not have a wired LAN port.

> Setup preparationSetup preparation

1. Connect the Ethernet port 1 of the router to the LAN port of the PC for router setting.
   
   ※ At this time, do not connect anything to the Internet port (blue terminal) of the router yet.

2. Turn on the router and check that the power lamp lights up.
   

> DHCP settings for the networkDHCP settings for the network

• In order to set up the router, you need to set the network setting to DHCP (automatic IP address acquisition)

• If your network uses fixed IP addresses, please reset to fixed IP once all settings have been completed

> For WindowsFor Windows

1. Right-click on the Wi-Fi icon at the bottom right of the desktop and click Open Network and Sharing Center
   

2. Click Change adapter settings
   

3. Right-click on Ethernet and select Properties
   

4. Click Internet Protocol Version 4 (TCP/IPv4) and select Properties
   

5. If Obtain an IP address automatically and Obtain DNS server address automatically have already been selected
   Click OK to close the window
   

6. If Use the following IP address or Use the following DNS server addresses are selected
   Make a note of the current IP values
   

7. Select Obtain an IP address automatically and Obtain DNS server address automatically, and click OK
   

> For Mac（when setting other than server PC）For Mac（when setting other than server PC）

1. Click on the Apple icon at the top left of the desktop and click on System Preferences ...
   

2. Click Network
   

   ※If Configure IPv4 is set to Using DHCP

3. Network setup is unnecessary. Proceed to the router setup procedures
   

4. If Configure IPv4 is set to Manually
   Make a note of the current IP values
   

5. Change Configure IPv4 to Using DHCP and click Apply
   

> Set Up the RouterSet Up the Router

> Login to the RouterLogin to the Router

1. Access http://tplinkwifi.net from the browser
   ※ Enter pass810 and pass810 on the screen when logging in for the first time, and click Start .
   ※There is a language change setting in the upper right of the screen, please change the language if necessary.

   

2. If the screen below is displayed, login is successful.
   

3. When logging in from the second time onward, enter the following account information and log in.
   Password : pass810
   

> Upgrade FirmwareUpgrade Firmware

1. Connect a wired LAN cable that can connect to the Internet to the router's Internet port (blue terminal).
   

2. Select ADVANCED → System Tools → Firmware Upgrade
   

3. Click Check for upgrade
   

• When no firmware updates are available, Your firmware is up to date is displayed as above

> Import SettingsImport Settings

1. Select ADVANCED → LAN→Set IP Address to 192.168.11.1 →Set Subnet Mask to 255.255.255.0
   

2. Select Advanced →Wireless Setting→ 5GHz →Enter ✅ in Enable Wireless Radio→Make the following settings.
   

   • Network Name(SSID) : HADO-5Ghz
     ※If you have more than one router, please set Network Name(SSID) to a different name.
   • Security : WPA/WPA2-Personal (Recommended)
   • Version : Auto
   • Enctyption : Auto
   • Password : hado2468
   • Mode : 802.11ac.only
   • Channel width : Please choose the appropriate Channel Width according to the actual situation, and don’t repeat it with other routers
   • Channel : Please choose the appropriate Channel according to the actual situation, and don’t repeat it with other routers
   • Transmlt Power : High

3. Tap to Save after setting.

4. Advanced → 5GHz → Confirm Network Name(SSID) displays HADO-5GHz
   

5. Select Advanced →Wireless Setting→ 2.4GHz →2.4Ghz is not used, so disable it and Tap Save
   

> BackupBackup

It is recommended to make a backup, please save it on the PC desktop, so that it is convenient to set up the router when needed.

1. Select ADVANCED → System Tools → Backup & Restore→ Tap Backup
   

> Restore Network SettingsRestore Network Settings

• If network settings were changed from static IP to DHCP while setting up the router, follow these procedures to restore static IP

> ForWindowsForWindows

1. Right-click on the Wi-Fi icon at the bottom right of the desktop and click Open Network and Sharing Center
   

2. Click Change adapter settings
   

3. Right-click on Ethernet and select Properties
   

4. Click Internet Protocol Version 4 (TCP/IPv4) and select Properties
   

5. Fill in all the values that were previously noted down and click OK
   

> For MacFor Mac

1. Click on the Apple icon at the top left of the desktop and click on System Preferences ...
   

2. Click Network
   

3. Change Configure IPv4 to Manually, enter all the values that were previously noted down, and click Apply
   

Completed.

> SupplementSupplement

After saving the backup to the desktop, if you need to set it next time, you can follow the following methods.

1. Select ADVANCED → System Tools → Backup & Restore
   
   Router Backup file→Open**
   
   

2. Select Restore → Yes
   
   *Router will begin to reboot

3. The login screen will be displayed again
   Enter the following account information and click Login
   Password: pass810
   

4. Rebooting is complete if Advanced → 5GHz → Network Name(SSID) displays HADO-5GHz